#OEM BLACK EMULSION PAINT PROFESSIONAL#
#OEM BLACK EMULSION PAINT DOWNLOAD#

These include biocides to stop algae and fungi growing on your walls. Nearly half of emulsion paint is made up of water.Īcrylic or epoxy polymers surround the pigments and help them to bind to the wall. Titanium dioxide is used for white, iron oxide for yellows, reds and browns, chromium oxide for greens, and carbon is used for blacks. Once this happens the polymer can’t be resuspended in water, which is why you can’t wash a water-based emulsion paint back off the wall once it has dried. The particles are suspended in water, then as the paint dries the particles fuse together creating a film of paint on the wall.

#OEM BLACK EMULSION PAINT DOWNLOAD#

(Click here to download original ANTEC paper for complete testing results.Emulsion paint consists of tiny polymer particles within which the pigments are trapped. The strain at yield was essentially unaffected. In some cases, painting slightly reduced the tensile modulus and/or the tensile strength, but not by more than 10%. The impact strength and the strain at break were the properties that were most strongly affected by painting. On the other hand, if the clear adhesion promoter was applied before the topcoat, the strain at break was 17.5%, not too different from the unpainted material. After painting with just the topcoat, the general-purpose ABS became very brittle, with just 5% strain at break. Find Rust-Oleum Enamel Paint to coat a variety of surfaces, including metal, masonry and wood. In terms of sheen, most are gloss, but we also carry flat, semi-gloss and satin. Unpainted, the general-purpose ABS had 22% strain at break. Lowe’s offers an extensive selection of enamel paint in a variety of colors of bright and bold colors. The effect of the topcoat on the general-purpose ABS was particularly notable. alkyd paints are used for automotive, construction, hardware, OEM appliance. For that blend, painting increased the strain at break for the other materials, painting reduced the strain at break. Acrylic paints are available in black, blue, clear, red, white & yellow. Again, the nylon 6/ionomer blend behaved differently from the other materials. Once again, a certain amount of this may help to promote adhesion, but taken to an extreme, it can degrade the properties of the plastic to unacceptable levels.įigure 2 shows the effect of painting on tensile strain (elongation) at break. In addition, paint solvents may cause swelling, softening, or dissolution of the polymer. However, solvents can also cause surface crazing, or even environmental stress cracking. In fact, it is often desirable for the paint solvents to attack (etch) the plastic to a certain extent, since this improves adhesion. First, paint solvents may attack the plastic.

#OEM BLACK EMULSION PAINT PROFESSIONAL#

Professional Flat Black Interior/Exterior Oil-based Industrial Enamel Paint (Half-Pint) Model 7578730. There are three ways that painting can affect the mechanical strength of plastics. Stops Rust Semi-gloss Black Interior/Exterior Oil-based Industrial Enamel Paint (1-quart) Model 353583. This meant that it was necessary to understand how the paint would affect the plastics used. Since BRP is promising to set a new benchmark for durability in the outboard industry, it was absolutely necessary to ensure that the durability of the painted covers equals that of the molded-in-color covers. Some of the custom colors for the new Evinrude plastic motor covers have been achieved using molded-in-color resins, while others use paint.

Oem black emulsion paint